other parameters?ll valves inlet/outlet connectors 1/4 or 3/8 inch face seal or tube weld flow coefficient (cv) ap 3600 0.29, x t = 0.6 ap 4600 0.5, x t = 0.6 internal volume 0.06 in 3 (1.07 cm 3 ) operating temperature -40 to +160? (-40 to +71?) surface finish 15 ?n. (0.4 ?) ra max standard; 10 ?n (0.25 ?); 7 ?n (0.18 ?); and 5 ?n (0.13 ?) optional inboard leakage 2 x 10 -10 sccs outboard leakage 2 x 10 -9 sccs he at 250 psig leakage across seat 4 x 10 -8 sccs he at 250 psig inlet pressure s eries ap 3600 & ap 4600 manual 1/4 & 3/8 inch diaphragm valve multi turn handle stainless steel 316l var secondary remelt or hastelloy alloy c-22 construction 15 ?n. surface finish (10, 7 and 5 ?n. optional) metal to metal seal to atmosphere replaceable pctfe seat (vespel optional) vacuum to 3,000 psig (207 bar) ap 3600 vacuum to 250 psig (17 bar) ap 4600 cleaned, assembled and packaged for high purity semiconductor applications internal stop prevents overstressing seat e ngineering d ata ? eries ap 3600 & ap 4600 m anual d iaphragm v alve materials series ap 3600 & 4600 s series ap 3600 & 4600 h type of service noncorrosive corrosive 687 t echnology w ay n apa , ca 94558 (707) 259-0102 f ax (707) 259-0117 www.aptech-online.com body stainless steel 316l secondary remelt hastelloy alloy c-22 finish electropolished and passivated electropolished diaphragm elgiloy elgiloy seat pctfe (vespel optional) pctfe all specifications subject to change without notice. hastelloy c-22 haynes corporation vespel dupont elgiloy elgiloy corporation wetted parts operating parameters all valves inlet pressure ap 3600 vacuum to 3,000 psig (207 bar) ap 4600 vacuum to 250 psig (17 bar) outlet pressure vacuum to inlet pressure proof pressure 4,000 psig (276 bar) burst pressure 8,000 psig (552 bar)
hmi4033/april2004 fv4 = 1/4 inch face seal female mv4 = 1/4 inch face seal male tw4 = 1/4 inch tube stub weld fv6 = 3/8 inch face seal female mv6 = 3/8 inch face seal male tw6 = 3/8 inch tube stub weld 1.75 = 1.75 ? face to face tw4 vs = vespel seat p = panel mount* * panel hole 0.78 ? diameter ap 3600 ap 4600 s = 316l stainless steel h = hastelloy alloy c-22 m = 10 in. ra v = 7 in. ra x = 5 in. ra 2pw = 2 ports butt weld 3pw = 3 ports butt weld 4pw = 4 ports butt weld 5pw = 5 ports butt weld (refer to valve porting guide for selection) m | surface finish options s | material 2pw | ports mv4 mv4 | connections inlet / outlet | options dimensional information porting configurations ordering information ap 3600 | series sample order number ap 3600sm 2pw mv4 mv4 u ncompromising quality , performance and reliability please refer to technical bulletin 203 for valve porting configurations. please note hastelloy design may vary. please consult factory for current specifications. all dimensions in inches (mm).
|
